English 
Italiano
WiFi – RS232/RS485 serial communication bridge
MDB-W is a WiFi – RS232 / RS485 serial converter that allows serial devices to communicate with IP devices transparently via WiFi network.
It has been designed and produced for industrial environments; it is robust with an extended temperature range.
Serial RS232 / RS485 – WiFi converter
MDB-W is a serial – wifi bidirectional converter between the WiFi communication channel and the RS232 and RS485 serial channels.
This Serial – WiFi communication bridge therefore allows all devices equipped with a serial port to communicate with software or cards based on IP communication which share a LAN network with WiFi. It is easily programmable thanks to a dedicated APP and the WiFi / Bluetooth interface. It does not require any additional software for configuration. A dedicated APP allows you to read, modify and set all device parameters.
The galvanic isolation of the serial ports ensures protection for all connected instruments and it is a guarantee of isolation from the rest of the system.
| GENERAL FEATURES | ELECTRICAL FEATURES |
| WiFi 802.11 b/g/n, WPA, WPA2, WPS | Power supply 9-32VDC |
| Optoisolated RS485 port (1200-115200bps ) | Average absorption <: 1,5W |
| DIN rail support (1 module) | Operating temperature: -20°C ÷ +60°C |
| Frontal signaling LEDs | Storage temperature: -40°C ÷ +80°C |
| Size: 18 x 90 x 60 mm (1 DIN module) | Relative humidity: from 0 to 80% without condensation |
| CE certification (Standard EN 61000-6-2,EN 61000-6-4) |
This serial – WiFi converter’s functions are:
- WiFi – RS485
- WiFi – RS232
- RS232 – RS485
Ideal as a converter for the ModBus protocol.
It is specifically designed for industrial environments. It is equipped with 10-30Vdc extended range power supply with protection on the serial port thanks to galvanic isolation.
From this page you can dowload the latest firmware version:
Dowload the latest Firmware
