Serial RS485 – Ethernet converter
MDB-E is a bidirectional converter between the Ethernet communication channel and RS485 serial channel. Therefore, it allows all devices equipped with a serial port to communicate with software or cards on Ethernet communication. MDB-E also acts as a RS485 converter.Thanks to the NFC interface (Near Field Communication) the configuration is very simple and practical. A dedicated APP allows you to read, modify and set all device parameters. The galvanic isolation of the serial ports ensures protection for all connected instruments and is a guarantee of isolation from the rest of the system.
|Ethernet 10/100 MB/s
|Power supply 10-32VDC
|RS485 optoisolated port (1200-115200bps )
|Average absorption <: 1,5W
|DIN rai support(1 module)
|Operating temperature: -20°C ÷ +60°C
|Front signaling LEDs
|Storage temperature: -40°C ÷ +80°C
|Size: 18 x 90 x 60 mm (1 modulo DIN)
|Relative humidity: from 0 to 80% without condensation
|CE certification (Standard EN 61000-6-2,
This Ethernet – Serial converter has been specifically designed for industrial environments, equipped with 10-32Vdc extended range power supply and with protection on the serial port thanks to galvanic isolation.
It is easily programmable thanks to a dedicated APP and the integrated NFC interface, they do not require any additional software for configuration.
MDB-E functions are available in three versions:
- Ethernet – RS485
- RS485 – Ethernet
Ideal as a converter for ModBus protocol.